- Here's an item or two from the latest
catalogues, magazine advertising or websites - not
necessarily all new products on the market, but items large and
small that will be of interest.
- If you contact any supplier as a
result of reading this page, please be sure to mention ModelFlight.
|
 |
 For
aerobatic fans, this is the Spin Doctor which was new to Pete
Tindal's range during 2000. It is a 62" wingspan, fully
aerobatic, close-to-scale model of the CAP222. The kit comes with
ready-joined epoxy glass cowl, tank, engine mount, dural u/c, wheels,
horns and links. All lite-play, balsa and foam parts are cnc cut.
According to Pete Tindal, it will fly very scale
on a good 53, out-perform the full-size on a 61 and turn into a
hooligan's delight with anything like a 73 upwards!
It can be ordered on-line from Pete Tindal's
Airplanes at a cost of £85 plus post and packing. A set of Securicor
decals can be supplied for an extra £15 and a carbon cowl will cost an
additional £17.
airplanes@petetindal.co.uk |
| New VG
Series entry-level transmitters from SANWA |
 The
VG400 is a 4-channel, 35MHz transmitter with a 6-channel
receiver. It has servo reverse on all channels and end-point adjust on
the throttle and can be used in a trainer system. With 4 x SRM 102
servos, nicads and charger it costs £119.99 or less from your Irvine
distributor - I've seen it at £95.95 from Bagnalls Models. Buy
online at www.bagnallsmodels.co.uk
or e-mail sales@bagnallsmodels.co.uk |
 The
VG600 is a 6-channel, 35MHz tx with a 6-channel receiver. Servo
reverse operates on all channels with end-point adjust available
on throttle (high and low), ailerons, elevator, rudder and flap
channels. Trainer system is catered for and there are retract and
3-position flap switches, 4 x SRM 102 servos, nicads and charger. Cost
£129.99 or less - the lowest I've seen so far is £115.95, again from Bagnalls
Models. |
|
